CWCE FHBL 100W-200W LED High Bay Light Installation Manual
Views : 530
Author : CWCE Lighting
Update time : 2020-10-24 14:01:57
LED High Bay Light Installation Manual
-Mounting instruction for type Z.
-Terminal block not included. Installation must be performed by a qualified person.
-The exposed connected tails for dimming circuit were assessed as FELV,Installation must be performed by a qualified person. The dimmer connection at least IP20 in the junction box.
Wiring Diagram Terminal block not included. To ensure that the product meets the protection level requirements. The luminaire must be connected to terminal block with IP66 degree or above. The terminal bock shall be conform to IEC/EN 60998-2-1 or IEC/EN 60998-2-2 and has the below specification:- Screw terminal block with 3 holes- Suit for 1,0-2,5 mm2 wire connectingInstallation must be performed by a qualified person, brown wire must be connected L pole, blue wire must be connected N pole, yellow green wire must be connected earth pole.
The perfect temperature and humidity for your plants are found between 75-85 °F and 50%-70% humidity，with plenty of airflow to replenish CO2. PH is 6-6.5. You may add more calcium and magnesium than normally needed.
Intelligent and Efficient LED High Bay UFO LED Light,
FHBL‐A series is a new design concept of LED high bay lights, with patent designed and perfect of safety, energysaving, reliable and intelligent control......