Application scope and characteristics of LED high bay light

The scope of use and characteristics of LED high bay lights: Widely used in hazardous environments such as oil exploration, oil refining, chemical industry, military industry, and land oil platforms, tankers and other places for general lighting and operational lighting; generally suitable for high protection requirements, Wet place. Performance characteristics: High-efficiency and energy-saving LED is the light source with relatively high luminous efficiency so far. The same illuminance can save 50%-70% of electricity compared with traditional light sources. That is, replacing traditional high-power lamps with low-power LED lamps can achieve the same lighting. It is a better choice to achieve energy saving and emission reduction; Ultra-short-lived LED is a solid light source, without filament blown, electrode aging and other drawbacks, with an average lifespan of more than 50,000 hours, which is the shortest-lived light source so far, and can be used temporarily without maintenance. ;

Safe and reliable LED adopts DC low voltage power supply, the calorific value is much lower than that of traditional electric light source, and does not generate high-frequency electromagnetic field, and does not cause electromagnetic disturbance to peripheral equipment; LED is encapsulated with epoxy resin, which is resistant to impact, vibration, and not easy to break. ; The emission spectrum of green LED is completely in the visible light band, no ultraviolet radiation, no mercury, no heavy metal pollution; no environmental hazards such as filament blown, glass breakage, flammable and toxic substances leakage.

Hefei LED High Bay Light High bay lamps are popularized in various fields. Hengyuan people believe that with continuous efforts, LED high bay lights will usher in a new area in the future. The main purpose of the high bay light is to carry out production operations in factories and mines. In addition to being an ordinary lighting lamp in the usual environment, the high bay light can also be used in some special environments, such as in workshops that are easy to explosion-proof or easy to prevent. Corrosion sites such as mines can be widely used.

What are the characteristics of LED high bay light power supply: 1. High luminous efficiency of LED high bay light power supply The luminous efficiency of high bay light is above 100 lm/W, and will continue to improve in the future. And in the future it may be more than 3 times. The efficiency of LED high bay light mainly refers to the effective light efficiency. The high bay light emits light at 120 degrees, so all the light is effective light. Although sometimes I feel that the 120-degree beam angle is a little narrow, it is still enough in most cases. 2. The power efficiency of LED high bay lights is high. The power efficiency of LED high bay lights is usually as high as 90%, which can save more than half of electricity compared with ordinary lamps. LED high bay lights are generally used for lighting in factories and workshops, and the number of lamps is relatively large. , so the power saving function is still very practical. 3. Long life of LED high bay light The life of a high bay light can reach 50,000 hours. The life of an ordinary lamp is usually only 5,000 hours (some domestic lamps have a life of only 300 hours). The difference between the two is nearly 10 times. Although some inferior high bay lamps have only 10,000 hours, they are still nearly 5 times different than ordinary lamps.

Hefei LED high bay light wholesale, led high bay light is a kind of lighting fixture that can be used in factories, industrial and mining enterprises, petroleum, chemical, smelting and other production workshops, warehouses and workshops, and can also be used in large shopping malls, indoor gymnasiums and other places. application. But when using it indoors, you need to pay attention. 1. Before installing the LED industrial and mining lamps, you need to cut off the power supply; 2. Please do not connect the high-voltage power supply before installing the product, and use it strictly according to the nominal working electrical parameters of the product; 3. If the external power cord and signal line of the lamp are damaged, it must be First cut off the power supply and be repaired or replaced by engineering and technical personnel with qualification certificates; 4. The power supply and lamp beads used in high bay lamps must be replaced and installed by professionals; 5. During the construction and installation process of high-power LED floodlights 6. Pay attention to fire prevention, electricity prevention, shock prevention and other treatment.